Jump to content
arri

AutoCAD 2013 - informazioni

Recommended Posts

AutoCAD 2013 supports e.g. these foreign formats:

  • CATIA V4 (.model, .session, .exp, .dlv) - all revisions,
  • CATIA V5 (.CATPart, .CATProduct) - R9-R20,
  • IGES (.igs, .iges) - all versions, incl. export,
  • JT (.jt) - 7.0,8.0-8.2,9.0-9.5,
  • UGS NX (.prt) - versions 3 to 7.5,
  • Parasolid (.x_b, .x_t) - up to version 23,
  • Pro/E (.prt, .asm) - up to Wildfire 5.0,
  • Pro/E Granite (.g),
  • Pro/E Neutral (.neu),
  • Rhino (.3dm) - up to version 4.0,
  • Solidworks (.prt, .sldprt, .asm, .sldasm) - 2003-2010,
  • STEP (.stp, .step) - AP214 and AP203E2.

Share this post


Link to post
Share on other sites

How to solve problem when setup says AutoCAD is installed

This trick might help to solve the problem. Note that the GUID (the code at the end in italics) is different for different applications and versions so you might need to search in the parent folder or go through them all to find what you look for.

Locate this folder and delete it with its content. Make a backup if you want to be on the safe side.

C:\Windows\Installer\{5783F2D7-B001-0000-0102-0060B0CE6BBA}

Use regedit, locate this registry key and delete it with its content. Make a backup if you want to be on the safe side.

HKEY_CLASSES_ROOT\Installer\Products\7D2F3875100B0000102000060BECB6AB

After that hopefully you will find that you can run the setup and install AutoCAD or whatever product you had in mind to install. Now you know how to install AutoCAD even if AutoCAD is already installed even though it was just the installer thinking so.

Share this post


Link to post
Share on other sites

AutoLISP API Changes for AutoCAD 2013 - Updated

AutoLISP has been in AutoCAD for a long time, well before my time when I started with AutoCAD R12 for DOS in 1994. At its core, AutoLISP really has not changed much in the past 15 years outside of the introduction of Visual LISP and the ability to utilize the ActiveX API on Windows.

There were a few additions to the Visual LISP extension in AutoCAD 2013 which expose some new functionality from the ActiveX API and a few new functions that allow you to obtain the Machine and User product keys of AutoCAD. Along with some new functions, there are some new variables introduced as a result of new constants being added to the ActiveX API.

To use the the changes made to the Visual LISP extension, be sure to call the VL-LOAD-COM function first.

New Functions:

VLA-GET-ACTIVEINVPROJECT / VLA-PUT-ACTIVEINVPROJECT - Specifies the active Inventor project being used by the Model Documentation feature. (Internal Use Only)

VLA-GET-INTENSITYCOLORSCHEME / VLA-PUT-INTENSITYCOLORSCHEME - Specifies the color scheme to use for displaying intensity values.

VLA-GET-SHOWCLIPPED / VLA-PUT-SHOWCLIPPED - Enables or disables the clipping boundary.

VLA-GET-SHOWINTENSITY / VLA-PUT-SHOWINTENSITY - Specifies if the point cloud is displayed using a shaded color scheme.

VLA-PUT-LENGTH - Sets the Length property for a point cloud.

VLAX-MACHINE-PRODUCT-KEY - Returns the AutoCAD product key from the Machine hive in the Windows Registry. (ie. "Software\\Autodesk\\AutoCAD\\R19.0\\ACAD-B001:409")

VLAX-USER-PRODUCT-KEY - Returns the AutoCAD product keyfrom the User hive in the Windows Registry. (ie. "Software\\Autodesk\\AutoCAD\\R19.0\\ACAD-B001:409")

Obsolete Functions:

VLAX-PRODUCT-KEY - While still supported, it is recommended to use the new function VLAX-MACHINE-PRODUCT-KEY instead which returns the same value.

Changed Variables:

ACNATIVE = 60

New Variables:

AC2013_DWG = 60

AC2013_DXF = 61

AC2013_TEMPLATE = 62

ACINTENSITYBLUE = 4

ACINTENSITYEDITABLEFLAG = 5

ACINTENSITYGRAYSCALE = 0

ACINTENSITYGREEN = 3

ACINTENSITYRAINBOW = 1

ACINTENSITYRED = 2

ACTRUECOLOR = 0

Share this post


Link to post
Share on other sites

AutoCAD command AI_DOWNLOAD_LANGUAGE_PACKS?

AutoCAD commands beginning with "AI_" are interactive LISP commands defined through the file acadNNNNdoc.lsp (e.g. acad2013doc.lsp) loaded with acadNNNN.lsp. This localized file is located in the AutoCAD subfolder - e.g. c:\Program Files\Autodesk\AutoCAD2013\Support\en-US\acad2013doc.lsp.

The command AI_DOWNLOAD_LANGUAGE_PACKS opens a web page for download of the respective "language pack" for your version (both industrial and release) of AutoCAD.

Share this post


Link to post
Share on other sites

terminare Autodesk Sync (AdSync.exe)

The Windows component for synchonization of documents and settings with the Autodesk 360 cloud service runs in the Windows system tray. If there are problems with this component (reports synchronization erros), try to apply the "Autodesk Sync 2013 Service Pack 1" (see Download).

If you want - for any reason - to completely disable this resident process (adsync.exe), don't just "kill" it in the Task Manager. Use the Windows tool "System configuration" instead.

With appropriate rights, run the Windows utility MSCONFIG, in the "System configuration" dialog go to the "Startup" tab and uncheck the option at the line "Autodesk Windows Components":

Share this post


Link to post
Share on other sites

How to get back the Welcome screen? (unchecked Display at Start Up)

If you have unchecked the option "Display at Start Up" in the AutoCAD welcome dialog and now you want to have it back, use the WELCOMESCREEN command (type it).

You can run it as a one-time command or you can check the option again to display it automatically on each launch of your AutoCAD sessions.

Share this post


Link to post
Share on other sites

Ciao mi presento sono Luana e sono ale prime armi con AutCad 3d ho un problema quando mando il comando invio nella tastiera no risponde al comando forse sbaglio il tasto da cliccare tu sai se si incontra in pdf. con tutti i comandi di tastiera?

Se mi puoi aiutare ti ringrazzio!

Share this post


Link to post
Share on other sites

Ciao avevo una domanda, volevo sapere perchè con l'autocad 2013 succede quando si salva il file inella versione meno recenti tipo 2007. il computer comincia non funzionare più, cioè mi blocca tutto.e devo riavviare bruttalmente tutto..

invece non succede se salvo nella versione 2010...

Non farò più ma volevo sapere solamente dipende al programma o il mio computer(nuovo processore 2Ghz. ram 4 Gig) non lo regge.

Ti ringrazio se mi puoi rispondere.

:rolleyes:

Share this post


Link to post
Share on other sites

Ciao avevo una domanda, volevo sapere perchè con l'autocad 2013 succede quando si salva il file inella versione meno recenti tipo 2007. il computer comincia non funzionare più, cioè mi blocca tutto.e devo riavviare bruttalmente tutto..

invece non succede se salvo nella versione 2010...

Non farò più ma volevo sapere solamente dipende al programma o il mio computer(nuovo processore 2Ghz. ram 4 Gig) non lo regge.

Ti ringrazio se mi puoi rispondere.

:rolleyes:

prova ad installare il service pack


Edited by arri

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...