Vai al contenuto

Script e utilities

Accedi per seguirlo  

in questa categoria vanno gli script e le utility per i vari programmi di grafica

31 file

  1. (3dsMax Script) - Choose ID Object Element

    This Script allows to set ID Object Element (obj properties > G-Buffer) for single or selection object. Very simple and funny!!
    -----------------------------------------
    Additional Info: Run Script normally: ToolsBar > MaxScript > RunScript...
    -----------------------------------------
    I highly recommend you SAVE YOUR WORK before working with "Choose ID Object Element"
    ----------------------------------------- 
    Terms of use: 
    The use of the script is an "As is". 
    The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. 
    Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or 
    computer. So if you installed the script,you accept the above conditions and declines any my responsibility. 
    -----------------------------------------

    13 download

    0 commenti

    Inviata

  2. (3dsMax Script) - Check Material ID Channel

    This Script allows to check in the viewport the Material ID Channel associate to the object.
    ----------------------------------------- 
    Terms of use: 
    The use of the script is an "As is". 
    The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. 
    Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or 
    computer. So if you installed the script,you accept the above conditions and declines any my responsibility. 

    4 download

    0 commenti

    Inviata

  3. GMRC_ver_106.mzp

    Lo script semplifica e automatizza l'operazione di posizionamento manuale dei libri/dvd.
    Tramite RowColumn è possibile infatti:
    scegliere fra diversi tipi di libri/dvd predefiniti; possibilità di creare colonne o righe di libri/dvd controllando: il numero o la distanza totale; distribuire in modo casuale le texture ai modelli; scelta delle dimensioni minime e massime dei libri; creazione automatica dei materiali per V_Ray, INVIDIA Mental Ray e Scanline; totale controllo sui parametri di riflessione, subdivisions, riflessione ecc ecc dei vari motori di render; inserimento tramite uno o tre punti; controllo di inclinazione e allineamento fra i libri/dvd.  
    RowColumn è uno script:
    avviabile su sistemi a 32 e 64 bit, con max 2011 o versioni successive; sviluppato con 3dsmax 2014 e windows 7 professional – “64 bit”.

    129 download

    5 commenti

    Inviata

  4. (3dsMax Script) - Select by Color and Move objects to Layer

    This simple script lets you choose a wirecolor by an object and select all objects with the same color. You can move the selection to levels we have chosen. Helpful for cad used ecc..
    -----------------------------------------
    Additional Info: Run Script normally: ToolsBar > MaxScript > RunScript...
    -----------------------------------------
    I highly recommend you SAVE YOUR WORK before working with "Select by Color and Move objects to Layer"
    -----------------------------------------
    Terms of use:
    The use of the script is an "As is". The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or computer. So if you installed the script,you accept the above conditions and declines any my responsibility.
    -----------------------------------------
    Tested on 3dsMax2009/2016 64bit
    -----------------------------------------
     
    --*****************************************************************************************
    -- MODIFY THIS AT YOUR OWN RISK ANS SAVE YOUR WORK BEFORE USE THE SCRIPT
    -- Please feel free to modify this code, but let me know so that I can benefit from the changes as well
    -- Modify added, must be e-mailed to  Medal71@hotmail.it
    --*****************************************************************************************
    Please let me know any bug or error!!!!

    4 download

    0 commenti

    Inviata

  5. (3dsMax Script) - Create quick Studio Setup

    This simple and naive script, allows to create a quick and basic "Studio" setup.
    -----------------------------------------
    Additional Info: Run Script normally: ToolsBar > MaxScript > RunScript...
    -----------------------------------------
    I highly recommend you SAVE YOUR WORK before working with "Create Quick Studio Setup"
    -----------------------------------------
    Terms of use:
    The use of the script is an "As is". The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or computer. So if you installed the script,you accept the above conditions and declines any my responsibility.
    -----------------------------------------
    Tested on 3dsMax2009/2016 64bit
    -----------------------------------------

    9 download

    0 commenti

    Aggiornato

  6. Scorpioncino

    Scorpioncino robot realizzato con 3ds max

    17 download

    0 commenti

    Inviata

  7. (3dsMax Script) - Quick Vray Camera for 3dsMax2016 and Vray 3.2

    Simply script which allows the creation of Vray PhysicalCamera in 3dsMax2016

    In the last release of Vray 3.2 for 3dsMax, the Vray Camera does not appear; VRay uses the physical camera of 3dsmax.
    If you write in maxscript:
    [CODE] vrayCreateVRayPhysicalCamera() [/CODE]
    we can create the Vray physical camera "hidden".

    Quick Vray Camera, facilitates the work for us.

    [b]Additional Info: [/b]Run Script normally: ToolsBar > MaxScript > RunScript or select the entire script and drag and drop in toolsbar to create a macroscript. A new button will appear; Press it to open the script

    -----------------------------------------
    I highly recommend you SAVE YOUR WORK before working with Quick Vray Camera
    -----------------------------------------

    Terms of use:

    The use of the script is an "As is". The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or computer. So if you installed the script,you accept the above conditions and declines any my responsibility.

    -----------------------------------------
    Tested on 3dsMax 2016 64bit and VRay 3.2
    -----------------------------------------

    Version Requirement: 3ds Max 2016 or higher

    34 download

    0 commenti

    Aggiornato

  8. (3dsMax Script) - IOR - Index Refraction

    Simple, harmless and silly script which allows you to view data of index refraction or IOR in the listbox

    Additional Info:

    Run Script normally: ToolsBar > MaxScript > RunScript...

    Little explanation:

    With button "Path Folder" you choose the folder "IOR" (attached with the script) in any directory you want. Note: DON'T change the name of folder!!!

    With button "Add IOR value" you open the file .txt where are written the values of IOR. You can here add new string of value and re-save the file. The new value will be added to the list. Note: DON'T change the name of file .txt!!!

    -----------------------------------------
    I highly recommend you SAVE YOUR WORK before working with IOR
    -----------------------------------------

    Terms of use:

    The use of the script is an "As is". The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or computer. So if you installed the script,you accept the above conditions and declines any my responsibility.

    -----------------------------------------
    Tested on 3dsMax 2016 64bit
    -----------------------------------------

    Version Requirement: 3ds Max 2010 or higher

    21 download

    0 commenti

    Aggiornato

  9. (3dsMax Script) - Environment Lighting HDR Studio (MR)

    This Script allows to insert a Environment map HDR in the scene and simluate a virtual set for rendering "white". Also useful in the preparation of illuminated images in HDRi.

    Additional Info: Run Script normally: ToolsBar > MaxScript > RunScript...


    -----------------------------------------
    I highly recommend you SAVE YOUR WORK before working with Environment Lighting HDR Studio (MR)
    -----------------------------------------
    Terms of use:
    The use of the script is an "As is". The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or computer. So if you installed the script,you accept the above conditions and declines any my responsibility.
    -----------------------------------------
    Tested on 3dsMax2010/2015 64bit
    -----------------------------------------
    A special thanks to Barigazy (ScriptSpot) for their precious and continuous support (more tips an function )
    Please let me know any bug or error!!!!

    85 download

    0 commenti

    Aggiornato

  10. (3dsMax Script) - Explode face in Object

    Another script to explode the faces of a mesh into individual polygon. Created during my work, it is useful to be used in junction with PartcleFlow Script. In fact, there is the possibility of creating a PFScript (based on Allan McKay fragment PFscript) with the obj newly created to be used within the event Bird.

    Additional Info:

    Run Script normally: ToolsBar > MaxScript > RunScript...

    -----------------------------------------

    Important:

    With objects that exceed the 900/1000 faces, the script can takes a long time and 3dsMax CAN CRASH OR FREEZE, especially when you check item "X-Form". So I highly recommend you SAVE YOUR WORK before working with "Explode face in Obj"

    -----------------------------------------

    Terms of use:

    The use of the script is an "As is".
    The author assumes no liability with regard to any kind of damage (hardware and software) caused by the use of this script. Are not responsible for any damage or cancellation or modification of the work, files, crash and or any problem in 3dsMax or computer. So if you installed the script,you accept the above conditions and declines any my responsibility.

    -----------------------------------------

    Tested on 3dsMax2010/2015 64bit
    Version Requirement: 3DSMax2009 or higher

    -----------------------------------------

    A special thanks to the members of ScriptSpot Barigazy and Miauu for their precious support

    11 download

    0 commenti

    Aggiornato

  11. (3dsMax Script) - Quick Resize Image

    Simple and fun script that allows quickly of resize any image.


    Additional Info: Run Script normally: ToolsBar > MaxScript > RunScript...

    -----------------------------------------
    Terms of use:
    The use of the script is an "As is".
    Are not responsible for any damage or cancellation or modification of the work, files,crash and or any problem in 3dsMax or computer.
    So if you installed the script,you accept the above conditions and declines any my responsibility.

    -----------------------------------------
    Tested on 3dsMax2010/2015 64bit

    Version Requirement: For 3dsMax 2010 and higher

    6 download

    0 commenti

    Aggiornato

  12. (3dsMax Script) - Simple Layer Manager

    A simple script that allows the operations base of layer manager. Useful for users of 3ds max 2015. it is based only on active layer. Run the script normally

    Work on 3dsmax2010 and up

    14 download

    0 commenti

    Aggiornato

  13. (3dsMax Script) - Find Info Image

    This simple and ingenuous script lets find some information about a loaded image.

    Additional Info: Run Script normally: ToolsBar > MaxScript > RunScript...

    -----------------------------------------
    Tested on 3dsMax2010/2015 64bit
    Version Requirement: 3dsmax 2009 and higher
    -----------------------------------------
    Terms of use:
    The use of the script is an "As is".
    Are not responsible for any damage or cancellation or modification of the work, files,crash and or any problem in 3dsMax or computer.
    So if you installed the script,you accept the above conditions and declines any my responsibility.
    -----------------------------------------

    14 download

    0 commenti

    Aggiornato

  14. (3dsMax Script) - Create Quick Wall

    This script allows us to quickly create a wall using the ShapeSpline (linee, text, circle ecc..) Very useful

    - Features

    -- Support for multiple objects
    -- Reverse knots order of selected spline or all "attached" shapes
    -- 2 modes: use offset shape and extrude modifier method or combo with extrude and shell modifier which is more flexible solution for sure
    -- Created modifiers can be instance or copy
    -- Wirecolor option (solid or random color)
    -- Option for unique name
    -- Extrude props: Segs, Map Coords, Caps
    -- Shell props: Segs, Autosmooth, Override Inner - Outher - Edge Mat ID (always use the form "number-number-number" ei. "1-2-3" or "3-2-1" or ...)
    -- Auto multimaterial (for edge-shell mode) with tree custom diffuse colors
    -- Convert selected shapes to spline shapes

    Idea and first release by Michele71. Fix script code and more options by barigazy

    24 download

    0 commenti

    Inviata

  15. (3dsMax Script) - Check Non-Quad Polygons

    Questo semplicissimo script, permette di visualizzare in un oggetto EditPoly le facce che hanno meno o più di d 4 lati (quad). Esso aggiorna un tutorial presente nell'Help di MaxScript (How To...Select Non-Quad Polygons).

    Attenzione! Funziona solamente con oggetti POLIGONALI (non mesh ma editpoly)

    Eseguire lo script:

    Aprire semplicemente lo script con "Run Script..." dal tab "MaxScript" presente nella toolsBar di 3dsMax.

    have fun!

    15 download

    0 commenti

    Inviata

  16. (3dsMax Script) Quick Z-Depth (mental ray)

    With this useful and simple script, you can create a non-destructive quick map Z-Depth in mental ray.

    -- Quick Help :

    Pick and Select CameraTarget (optional) : select a camera target in the scene for the render.
    The label "target distance (Z Max) suggest the value of max distance Z depth
    Z min: the minimum measurement of depth of the map Z (camera)
    z Max: the maximum measurement of depth of the map Z (traget)
    Preview Z-Depth (active view) : quick preview of the selected view
    Preview Z-Depth (aselected camera) : quick preview of the selected camera target
    Render VFB (output size): Render the z.depth on the Virtual Frame Buffer with the measure in output size (Tab Rendering)

    -- Caution!

    For very complex scene, the analysis may take some time

    ----------------------------------------
    Installation:
    1- Unzip
    2- Copy the folder "Michele71_Script"
    3- Paste then into your folder Scripts in Max (like "C:\\Autodesk\3dsMax2010\Scripts")
    4- Start 3DSMAX and run script "Quick_Z-Depth.ms" inside the folder "Michele71_Script"
    5- Go to "Costumize" > "Customize user interface" > "Menus"
    6- In "Category" find "Michele71_Tools" and choose "Quick_Z-Depth"
    7- Create new menu in list "Menus" and Drag and Drop the new menu in the "Main Menu Bar".
    8- Drag and drop "Quick_Z-Depth" in new menu.
    -----------------------------------------

    Enjoy!

    for suggestions or other: Medal71@Hotmail.it

    18 download

    0 commenti

    Aggiornato

  17. (3dsMax Script) Quick Ambient Occlusion (mental ray)

    This simple and fun script, creates a fast Ambient Occlusion. It must be used with Mental Ray. The operation is non-destructive, so you do not loose the original settings. I hope it can help you... Enjoy!

    Installation:

    Before installing, delete any previous versions (very important)

    1- Unzip
    2- Copy the folder "Michele71_Script"
    3- Paste then into your folder Scripts in Max (like "C:\\Autodesk\3dsMax2010\Scripts")
    4- Start 3DSMAX and run script "Launch_QAO.ms" inside the folder "Michele71_Script"
    5- Go to "Costumize" > "Customize user interface" > "Menus"
    6- In "Category" find "Michele71_Tools" and choose "Quick_Ambient_Occlusion_1.5"
    7- Create new menu in list "Menus" and Drag and Drop the new menu in the "Main Menu Bar".
    8- Drag and drop "Quick Ambient Occlusion" in new menu.


    Version Requirement:

    3dsMax 2010 and up


    Terms of use:

    The use of the script is an "As is". Are not responsible for any damage or cancellation or modification of the work, files,crash and or any problem in 3dsMax or computer. So if you installed the script, you accept the above conditions and declines any my responsibility.

    26 download

    0 commenti

    Aggiornato

  18. Free Memory in 3dsmax FreeMem.mcr

    Free memory in 3dsMax

    http://www.characterink.com/

    55 download

    0 commenti

    Inviata

  19. Calendario 2013 Treddi.com

    Ecco il calendario 2013 di Treddi.com da scaricare e stampare.
    Il calendario contiene tutte le immagini in alta risoluzione che hanno ricevuto il Best Of Award di Treddi.com durante il corso di quest'anno.

    Auguri a tutti per felice Natale ed un ottimo 2013.

    558 download

    0 commenti

    Aggiornato

  20. Calendario 2012

    Treddi.com vi augura un sereno inizio 2012 e cosa c'è di meglio di un bel calendario in HD con tutti i Best of dell'anno appena passato per iniziarlo alla grande? Completo di link per rivivere insieme tutte le opere di maggior rilievo.

    1178 download

    21 commenti

    Inviata

  21. LayerMan.mel

    Gestisci i Display Layers in modo facile e veloce.
    Contenuti:
    script minimizzati.
    codice sorgente per chi vuole imparare o consigliarmi una migliore programmazione MEL.
    guida installazione.
    licenza MIT-Style.
    Help completo in italiano.

    PS: Se trovi errori, dimenticanze, bugs etc.. lascia un commento.
    Sono benvenuti consigli per migliorare lo script!
    grazie jBrush.

    Manage Layers display in an easy and fast way.
    Contents:
    minimized scripts.
    source code for those who want to learn or recommend a better MEL programming.
    installation guide.
    MIT-Style license.
    complete Help in english.

    PS: If you find errors, omissions, bugs, etc. .. leave a comment.
    We welcome suggestions to improve the script!
    Thanks jBrush.

    14 download

    0 commenti

    Inviata

  22. material_ID_v1.mse

    Semplice script che permette di renderizzare ogni materiale presente in scena con un colore uniforme e univoco. Particolarmente utile per gli utenti Vray dato che sopperisce alla mancanza di anti aliasing nel render element Vray_MtlID.

    44 download

    1 commento

    Inviata

  23. POLYADD

    POLYADD è una macro per AutoCAD che permette attraverso il comando
    PADD di selezionare una singola polilinea alla volta
    (entità LWPOLYLINE, POLYLINE 2d/3d, ARC...)
    per aumentarne i vertici di controllo.
    Un programma Vlisp molto semplice e sorprendente nelle sue
    possibilità applicative.

    Modalità d'uso:
    Entrare in AutoCAD e caricare la macro POLYADD.VLX con il
    comando _APPLOAD.
    Infine lanciarne l'esecuzione da tastiera con il comando PADD

    Nota: per un funzionamento corretto PADD può essere utilizzato
    solo una volta sulla medesima polilinea.

    34 download

    0 commenti

    Inviata

  24. Eliramp

    Una piccola utility per Autocad, per realizzare rampe elicoidali. il file va copiato nella cartella Support di Autocad. All'interno del programma digitate il comando eliramp e seguite le richieste di dati del programma. In particolar modo per avere rampe ben definite inserite un numero alto di segmenti
    Er Pomata

    76 download

    0 commenti

    Aggiornato

  25. (3dsMax Script) Quick X-View

    Questo è uno script di utilità che permette di vedere attraverso (X-View) un'oggetto grazie all'opacità del suo materiale. E' un ottimo supporto quando si ha bisogno di vedere una immagine di riferimento attraverso un oggetto durante la fase di modellazione. E' possibile decidere il colore e il grado di opacità su qualsiasi oggetto presente nella scena. Quick XView può sostituire benissimo la funzione "See-Through" (Alt+X). Si raccomanda di premere il pulsante "Refresh" ogni volta che si seleziona un oggetto già trattato con XView per aggiornare le sue caratteristiche nel rollout di controllo.



    Informazioni aggiuntive:

    Copia e incolla la cartella "Q_Xview" all'interno della cartella "ui" nella directory di installazione di 3dsMax per es. C:\\Autodesk\3ds Max xxx\ui (dove xxx è la tua versione di 3dsmax)

    Installazione: Normale procedura per l'installazione di un MacroScript.

    In 3dsMax, apri il macroscript "Quick_XView.mse".
    Vai in "Custumize" > "Custumize User Interface.." > "Menu"
    Sotto la voce "Category", trova "Michele71_Tools".
    Crea un nuovo menu dalla lista "Menus", trascina e rilascia il nuovo menu in "Main Menu Bar".
    Trascina e rilascia lo script "Quick_XView" nel nuovo menu.


    Lavora con le versioni di 3dsMax 8/9/2008/2009/2010/2011

    23 download

    0 commenti

    Inviata

Accedi per seguirlo  
×